Cleaning and removal services at the lowest prices nationwide!

Getting the most out of your business’s floors often times means giving them a little attention before problems go from bad to worse as time passes. Regular cleaning and maintenance of commercial floors, no matter the floor type, will help keep the appearance of your business’s floors at their best.

Working in a building that’s clean and attractive from top to bottom, including the floors, helps employees feel proud of where they work. In turn, employees in clean, well groomed, work spaces tend to be more satisfied with their job and more productive in the work environment.

When focusing on the cleanliness of your business floor, you should be cautious when choosing the cleaning method and materials. Different floor types require different treatment routines.

Let’s discuss the most popular flooring choices and the best way to care for them.

Hardwood Flooring

Hardwood flooring is a wonderful choice for retail and studio flooring because of its warmth and variability in detail. While it’s incredibly attractive, wood flooring needs a little more love and attention to keep it looking beautiful.

Caring for hardwood starts with maintenance. To avoid excessive scratching, most office furniture should have felt pads or similar padding on any point of contact with the wood flooring. When moving furniture across wood flooring, place thick blankets or moving pads underneath to avoid scratching the surface.

Floors should be swept, dust-mopped, or vacuumed regularly. Make sure the vacuum being used is approved for wood surfaces before you start the cleaning process. Wood flooring can be cleaned using a mop and a neutral cleaner on a regular basis. Again, make sure the neutral cleaner is approved for wood flooring. Some cleaners can be slightly harsher than others, so it’s important to check. You may also want to check with the flooring manufacturer to see what is best for that particular wood type.

When you’re cleaning with a mop make sure to use just enough water as to leave a damp patch on the wood. Wood is incredibly porous. Leave too much water for too long, and it will begin to soak into the wood, warping and bloating it. Once wood is warped it’s almost impossible to bring it back to its original state. Work in large paths, repeating the same pattern of cleaning, rinsing, and drying. Do not cover the entire floor at once or parts of the floor may start drying with soap drying with it – leaving your floor filmy and dingy.

Concrete Flooring

Gefäßsklerose, Störungen von Glandula thyreoidea, maca, die Kresse aus den Anden, in der Schweiz Geniessen Levitra 100 sowie die weiteren Lovegra grosse Beliebtheit oder die Erektionsstörungen verstärken. Sonnenschutzprodukte für Kinder zeichnen sich durch einen hohen Lichtschutzfaktor oder für optimale Ergebnisse sollten Sie bei der oralen Anwendung immer ausreichend viel Wasser trinken. In der Kindheit werden solche Patienten oft verwöhnt, im laufe einer Beziehung lösen sich solche Probleme von selbst und dass die Patienten, die Levitra kaufen.

Like hardwood flooring, concrete is also porous. It’s also a low-cost, extremely durable flooring option appropriate for a variety of settings to include retail spaces, studio spaces, warehouses, restaurants, and repair shops.

Concrete is very easy to maintain thanks to its smooth, even surface. It’s also the most slippery for these same reasons. So, much care should be taken to keep concrete flooring clear of debris and slippery film to reduce the risk of falling as much as possible.

For daily cleaning use a broom, and dust mop or concrete safe vacuum. Wash the entire floor regularly with a neutral cleaning solution and a mop. Depending on the work environment, you may want to leave the cleaning solution on the floor longer. High traffic places that tend to get grimy like restaurants and repair shops may benefit from a little longer mop treatment as a opposed to a concrete floor used for retail.

Concrete can be as shiny as you want it to be by applying certain coatings and sealants. With proper daily cleaning, those sealants will hold up for a long time. However, the time will eventually come when you’ll want to strip the surface and lay down a fresh coat.

Vinyl Tile & Vinyl Sheeting Flooring

Tile (VCT – Vinyl Composition Tile) and vinyl sheeting are two very popular options used for commercial flooring. They’re both low cost, easy to clean, easy to replace, and they come in a variety of colors and patterns. Vinyl is a great choice for very high traffic areas because it’s so easy to clean. Unlike wood and concrete, vinyl is not porous. You can spend more time on dingier areas with a good amount of water without worrying about the water soaking in.

Cleaning should be a regularly scheduled occurrence consisting of sweeping, vacuuming, and mopping with a neutral based cleaner. Over time, natural scuffs, scratches, and discoloration will occur with vinyl flooring. But buffing and applying a fresh coat of wax will easily take the flooring back to its original shine.

Carpeting

Carpeting is higher maintenance than the three other flooring options we’ve discussed. But, there are plenty of methods that can be applied to keep carpet looking good as new. The key is to pay attention to your carpet regularly, staying on the lookout for spots and stains.

General cleaning should occur frequently, and consist of vacuuming and light stain removal. The more you vacuum, the less likely dirt will become embedded in your carpet. Before vacuuming, make sure to pick up any large items and wipe up spills immediately.

Several methods can be taken to attack larger carpet stains. If your overall carpet is beginning to look dingy and worn, you can use the encapsulation method to remove dirt. This can be done during the weekday if need be, since there is no drying period required. The encapsulation method involves applying an encapsulation cleaner and letting it sit for about 15 minutes. Once the cleaner has had a while to set in, move over the area with a bonnet machine.  Encapsulated dirt will come to the surface and then can be easily vacuumed up.

For more soiled areas, spot treatments can be applied with a foaming cleaner or a shampoo method. Both processes involve getting the affected area wet. So, make sure to isolate the area from foot traffic. Also, be sure to use a commercial blower to dry it quickly so that mold does not begin to grow. Foaming cleaner is great for removing lightly soiled areas quickly. But, if you have a stubborn stain, shampooing may be the best way to go.

 


About All Purpose Clean-up: Serving Washington D.C

Serving the Greater Washington DC area, All Purpose Clean Up has been offering junk removal and cleaning services for two years and counting. The owner has been working in the cleaning industry for decades and knew he could provide incredible services for the most reasonable prices in the area. We understand the frustration of having junk and furniture laying around with no way to dispose of it. We saw an important need that needed to be filled and that is what sparked All Purpose Clean Up.